Interactive Dental Chart

Digital dental chart.
Zero ambiguity.

You mark every tooth, every bridge, and every implant on the chart. The lab receives your plan inside the prescription — the exact document you approved, with no reinterpretation along the way.

TAP ANY TOOTH · LIVE DEMO
01 The Essentials

The digital dental chart, in three points.

What it is, how it works and why every lab eventually needs one. No theory — only what matters to the clinic and the lab.

BEFORE · AFTER

What a digital dental chart is

An interactive representation of the 32 teeth where every tooth is classified individually: restoration, abutment, pontic, implant, extraction, missing or existing crown. It replaces the hand-drawn chart with a clickable interface integrated into the digital prescription.

The lab receives the exact map of the clinical plan — not a text description it has to interpret.

1 TOOTH · 3 SYSTEMS

FDI, Universal and Palmer — three systems, one map

The TrazaLab chart supports the three most used numbering systems in the world: FDI (international standard), Universal/ADA (United States) and Palmer (with quadrant symbols). You switch with one click.

The same case is understood without ambiguity in any country. See the full systems comparison.

IN 30 SECONDS

How to use it — in 30 seconds

On the chart above: (1) click any tooth to select it, (2) choose the type (restoration, abutment, pontic, implant, extraction), (3) turn on bridge mode to connect abutments and pontics with the visual arc.

It is the same tool used in the digital prescription — not a simulation.

Color Code

Read the case in 2 seconds.

Seven colors. Seven roles. The lab sees at a glance what each tooth does in the plan — no tables, no abbreviations, no interpretation.

5 REST
Restoration
REST

Tooth with a preparation that receives an onlay, inlay, or veneer. The tech knows the restoration type before touching the model.

4 PIL
Abutment
PIL

Tooth prepared as a bridge support or structure over an implant. Marks the ends of the prosthetic span.

3 PON
Pontic
PON

Artificial tooth on a bridge, with no root of its own. Suspended between abutments with a visible connector arc.

2 IMP
Implant
IMP · Post visible

Osseointegrated implant. The chart draws the thread and apex — brand, platform, and dimensions are recorded on the tooth.

6 COR
Existing crown
COR

Prior restoration kept in the current plan. The tech leaves it alone and respects it when designing contacts.

7 EXT
Extraction
EXT

Tooth flagged for extraction before prosthetic work. The lab knows the space will be clear.

8 AUS
Missing
AUS

Edentulous space with no planned treatment in this case. Marked for context only, not for intervention.

Full Visual Map

The whole chart in a single view.

No text lists. No ambiguous numbers. The chart shows the full arch with color-coded classifications — the lab knows exactly what role each tooth plays.

Every tooth has visual identity

Not just a number in a table. A piece on a map where color defines the role: blue for abutments, amber for pontics, red for extractions, purple for implants.

The tech sees the whole case in two seconds. No instructions to read. No abbreviations to interpret.

7 classifications — zero ambiguity
Dental Chart
Bridge Mode

Connectors that define structure

When you turn "Bridge ON", abutment and pontic teeth get visually linked by amber arcs that represent the bridge structure. The lab sees the span, the supports, and the sections at a glance.

No more descriptions like "bridge from 3 to 6 with pontics at 4 and 5". The map shows it. Automatic validation of span length and abutment distribution.

Automatic structure validation
Bridge Mode
Per-Tooth Selection

Every tooth, classified individually

One click opens the classification panel. 7 color-coded types, an implant brand picker with the 10 most-used brands, and a per-tooth clinical notes field.

The lab receives a structured data point — not a handwritten instruction someone has to interpret.

10 implant brands included
Implant Registry

Every implant with its anatomical post

When a tooth is classified as an implant, the chart draws the full post below or above the tooth — helical thread and apex. Not a generic icon, but the real silhouette of the component.

The classification panel records brand, platform, diameter, and length. The lab receives the exact component — not "Straumann standard", but Straumann BLT NC 3.3 × 10mm.

10 premium brands · brand + platform + dimensions
Implants
Pediatric Mode

Deciduous teeth, correct notation

A toggle switches the arch to pediatric mode: 10 teeth per arch, automatic FDI notation (55-65 upper, 85-75 lower). The system adjusts the interface — not the tech.

For mixed-dentition cases or pediatric clinics that need digital prescriptions with the same precision as adult cases.

Automatic arch switching
Pediatric — FDI
Integrated in the Prescription

Not a separate tool. It is the Rx.

The dental chart lives inside the Digital Prescription, alongside material, shade, special instructions, and version history. Everything in one document that reaches the lab.

Digital Prescription / Case #34
Version 15 Sent
A1 — Lithium disilicate
Adjust facial contour on #8 for alignment with #7 and #9. Firm proximal contact on #5. Verify occlusion in CR with 8-micron articulating paper.
Eliminate Inconsistency

Three sources of error. Three fixes.

No more "tooth 14... or was it 24?" The dental chart attacks the three most common ambiguities in clinic-to-lab communication.

Numbering confusion

The visual map removes the dependence on numbers. FDI or Universal, the tooth is identified by position in the arch. Impossible to mistake 14 for 24.

Role ambiguity

Every tooth has an explicit classification — abutment, pontic, extraction. No room for "I think that one was the abutment". The color says it.

Bridge structural error

Bridge mode validates the distribution: abutments at the ends, pontics in the middle, connector arcs visible. Structural errors surface before fabrication starts.

Touch · Multi-Device

Works where the surgeon works.

The same chart on the iPad chairside, on the lab's laptop, on the owner's phone. Touch-first: every tooth has a generous tap target, controls sized for fingers — not cursors.

No app to install. Runs in the browser, on Chrome, Safari, Edge or Firefox.

1 tool · 3 surfaces · zero apps
iOS iPadOS Android macOS Windows Web
03 Frequently Asked

Digital dental chart, direct answers.

Everything dentists and labs ask before adopting — no fluff.

What is a digital dental chart?
A digital dental chart is the interactive representation of the 32 teeth in electronic format, where each tooth is classified individually (restoration, abutment, pontic, implant, extraction, missing, existing crown). It replaces the hand-drawn paper chart with a clickable interface integrated into the digital prescription, removing ambiguity between the dentist and the lab.
What is the difference between a dental chart and a dental record?
The dental chart is the visual representation of the teeth (anatomical map). The dental record is the complete clinical document that includes the chart but also history, exams, anamnesis and treatment plan. The chart is one section of the record — focused specifically on the visual condition of each tooth.
Which numbering systems does the TrazaLab dental chart support?
It supports the three most used international systems: FDI (most common in Europe, Latin America and most of the world), Universal/ADA (used in the United States) and Palmer (with quadrant symbols). You switch systems with one click and the same prescription is understood without ambiguity in any country. See the full comparison.
Is the TrazaLab online dental chart free to use?
The interactive chart is available as a public demo on this page — you can click any tooth, build bridges and test every classification without signing up. The version integrated into the digital prescription, which sends the case to the lab, is included in the TrazaLab subscription with a 14-day free trial, no credit card required.
Can I use the chart on tablet or phone?
Yes. The chart is designed touch-first: each tooth has a generous tap target, controls are sized for fingers (not cursors) and the layout adapts to tablets and phones. It is the same tool on the surgeon's phone and the lab's monitor.
What makes the TrazaLab chart different from a traditional dental chart?
Three concrete differences: real anatomical shapes (not generic circles), visual bridge mode with a connector arc (you draw the bridge, you do not type it), and implants with the anatomical post drawn at the root. Plus the critical point: it is integrated into the digital prescription, so the lab receives the exact map of the clinical plan — not a reinterpretation.
Does the chart include deciduous (baby) teeth?
Yes. The tool toggles between the adult arch (32 teeth, FDI 11-48) and the pediatric arch (20 deciduous teeth, FDI 51-85 or Universal A-T). Notation switches automatically with the system you select.
Can I export or print the chart?
When the chart is part of a prescription in the TrazaLab platform, it exports with the clinical document as a PDF and can be printed. The public demo on this page is interactive and does not have export built in — its purpose is to show how the tool works.

32 teeth.
Zero remakes.

The interactive dental chart is part of TrazaLab — the platform where every case arrives complete, moves without friction, and ships without surprises.